Recent Post
Recent Comment
  1. Kho Sàn Gỗ Hóc Môn Monday, Apr 8, 2024
    ????Nâng cao chất lượng sản phẫm và dịch vụ luôn c...
    Comment by Kho Sàn Gỗ Hóc Môn
  2. Where to buy quality flooring, luxury, cheap? Thursday, Jul 9, 2020
    Địa chỉ tin cậy, sẽ ghé trong thời gian tới!...
    Comment by Phan Thị
  3. 14 Step Installation Laminate Flooring Thursday, Jul 9, 2020
    Hướng dẫn rất chi tiết và cụ thể, người tay ngang ...
    Comment by Nguyễn Nghĩa

Installing laminate flooring

installing wood floors quickly and easily, saving time, and use immediately after installation. you have a floor natural beauty of the wood.

With advanced technology, the slats are installed together easily and quickly, saving time, and use immediately after installation. Here are installing laminate flooring in accordance with the following simple steps:

Preparation: All surfaces are flat floor, not lumpy, some tools such as pencils, rulers square, saw, hammer, ruler, wedges.

Included Accessories: Prior to spread porous wood flooring (there are 2 types of porous and spongy white silver) uses moisture, reduce noise travel.

Regarding aesthetics, the wood floor should be placed parallel to the direction of incoming light

Start the installation of wood flooring:

- Use foam strewn on the floor and started fitting laminate panels before installation and calculate the final line of not less than 50mm

- Start the installation from the left wall, put on the wall sections

Note: The distance from the wall surface exposed to wood panels from 10mm - 15mm when mounted to insert small wedges for no shrinking.

Edge of yin and yang: each plank grooved when connected to tight

- 2nd Place planks leaning edge wort and then dropping down so close to the edge wort wooden plank 1st, 2nd push the wooden planks on the 1st sheet and continue to the end customer.

- Measure and cut the last plank of the first row, the cut may use the top row 2, but the minimum length of 30 cm.

- The same applies to the 2nd row of seeds 1st and 2nd row wort inclined edge in row 1, gently push the board into the narrow, straight over the floor.

- Every 4th onwards do the same location every 2.3 and the installation of the newly assembled boards.

- Cut the hole for mounting on wood panels around the fixture on the floor (column, ...) This place distance of 10mm from the board to the fixture to the floor may elongation.

- Every last remaining gap measure and a pencil mark and a wooden stick that fits the gap left on the floor.

- Finally withdraw the original wedges and wool wall mounted wood flooring (wood flooring accessories) can go wire, the network behind.

Once installed wood flooring you can use right away, and now has some new flooring may need to replace the mounting style just fits rolling move things in the family. And so you have a floor brings the natural beauty of the wood.

Tags:

comment(s)