How to install outdoor wood floor

The chart and instructions outlined in this guide are for illustration purposes. The construction of reality in the works to be used AWood® according to local conditions and building codes. Consumers accept all risks and liability related to the construction and use of this product.

The scheme is designed according to the diagram construction. Therefore, time and cost can be saved by making a design. The product mixture outdoor furniture, AWood® can be modified to meet the needs of customers. When construction products, workers may use woodworking machinery, such as cutting, sawing, drilling, etc.

* Note:

AWood® outdoor floor should not be used for columns, beams, rods momentum, supporting paragraphs force or other load-bearing segments.
Failure to follow instructions could void your warranty.
Tools installed:

AWood® products work well with the standard woodworking tools (eg portable power drills, power saws, impact drill, etc.)

We recommend that all blades have a box to protect the safety of construction workers. Should use stainless steel screws.

Protective clothing, safety glasses and respiratory protection are recommended.

Outdoor Wood Flooring: Photos

Accessories: 

Prepared

Before installing, make sure the ground clean, flat and hard surface. For the ground, the point must be hard to fix the sound track; For concrete surface, to ensure its thickness ≧ 6 cm to avoid drilling holes as ground cracks, subsidence, or not good for the expansion of the wood. Screws used in the installation process to be galvanized or stainless steel to avoid rusting.

1. Insert the rod fixed momentum

Distance

We recommend that each bar 1 of about 367mm apart momentum (If decking and track bar is vertical, this distance should be shortened.). A gap is too large will cause the wood to bend down.

The gap junction

Distance longitudinal momentum of the bar to the wall or barrier should be less than 20mm hard, the rest should be from 3 to 5 mm, the deep groove of the track bar to screw

2.Installion Floor

The first piece of flooring is installed on the side of being screw, then use the plastic tightly connected to start the 2nd before mounting bar to 1 bar of wood should not be longer than 3m · Note: the pieces of the connected to each other by 5mm - Continue so until the completion of the installation. When the wood out of the bar overthrust momentum, be sure not exceed 2 cm to avoid bending or breaking the wood. - Use the wood planks to cover your head and stick momentum, can decorate hobby

3. Complete the installation of wood flooring, there is an outdoor wood flooring projects elegance and class more.