Does AWood wpc have a quality assurance process?

Does AWood® WPC have a quality assurance process?
AWood® wpc composite is a natural fiber plastic composite material and is made from wood fiber, wood pulp and thermoplastics such as PP/PE. In addition to wood fibers and resins, wpc may also contain bio-additive materials such as mineral fillers and colorants. They provide the ability to integrate polymer and wood pulp, in an environment that facilitates optimal processing.
The most widespread use of AWood® wpc is in outdoor decking, but it is also used for balustrades, fences, landscaping timbers, cladding and partitions, park benches, grounds trim, framing doors and porches, and indoor furniture. These materials can be molded with simulated wood grain details.
 

Does AWood® have a quality check process during production?
Factory 4-point inspection process to ensure quality:
1. Raw material testing: as soon as the raw materials are put into the production units, they will go through our laboratory tests to check their properties, after which they will be tested. go to the store
2. Tests at production stage: at different stages of production, tests are performed to confirm whether the purpose of a particular stage is served. For example, an important constraint for polymers used in wpc is the requirement that the processing conditions (melting temperature, pressure) will not thermally degrade the wood filler. Wood degraded about 220^oC.
3. Product inspection: therefore, manufactured products must undergo the most stringent tests of global standards, pass those tests, and be eligible for dispatch.
4. Post-production inspection: before dispatch, visual inspection is done to check product tolerance and any other type of manufacturing defect will be disqualified.
 

AWood® wpc quality assurance
AWood® wpc floor life: 10 years warranty when used under normal conditions (excluding natural disasters) and in the manner in which the product was designed to be used.
AWood® wpc warrants that if there are any obvious manufacturing defects or if the product suffers structural damage caused by common termites/white ants during the warranty period, the defective products will be repaired. replaced with equivalent material in equivalent quantities.
 
Manufacturing defects are often described as:
- Blistering, delamination or evidence of voids in the material
- Decay or fragmentation of the material
- Rotation, warping or cracking of the material
- Color change greater than 10%/year, discoloration or fading unrelated to normal weathering
- Shipping and/or any delivery charges and assembly or disassembly costs are not included in this warranty.
- Any product damaged by vandalism, misuse or improper installation is not covered by the warranty.
 
Proud to serve:
Lifespan of AWood® wpc: 10 years warranty when used under normal conditions (excluding natural disasters) and in the manner in which the product was designed to be used.