Foam

Foam for flooring:

- Before installing the wooden flooring have to check the ground surface: it must be dry and flat, the minimum curvature of the floor through a distance of 1m is not over 5mm.

- Using foam under the wooden flooring in oder to :

1 / Prevent the moisture breaks into the flooring from

2 / Balance the hardness of the ground surface

3 / Lessen the noise up to 70% while moving on the wooden flooring

Laminate flooring, plastic flooring using foam 1.7 - 2mm, Hardwood flooring using foam 3mm

There are 3 types of Foam commonly used to line the floor: Pe foam, silver-coated foam and rubber foam

1/ Regular white Pe foam: - White foam used as a lining material for public wood floors, the most common thickness is 2mm. The foam type usually has small waves on the roll surface. - Foam foam 2mm: width 1m, length 150m, roll = 150m2 - The advantages of regular foam are low cost, cost-effective, moisture-proof, just enough water absorption, not superior to the other two types.

2/ Pe Foam coated with silver 2mm - Silver coated foam from the original material is white foam, coated with silver aluminum plating. Provides excellent resistance to moisture, water absorption, and heat insulation. - Silver Foam 2mm: width 1m, length 150m, roll = 150m2 - As a good material, in the line of floor foam, the layer protects the floor from below

3/ Foam rubber 2mm - The optimal accessory for lining wooden floors, plastic floors, anti-smooth, noise reduction, offset the uneven protrusions of the floor and prevent the steam under the floor from evaporating. - Dimensions: 91m x 1.22m x 2mm roll = 111.02m2 - 2mm young rubber foam has quality standards, is a green material that should be used and used safely